***
*** 6.4.3_promotescalar_final.testplan: promotegraph testplan for DC/DC tutorial section 6.4.3
***
*?@ analysis	objective	jumper	measurement	measurement	measurement	measurement	source	load	label
***
Ac	BodePlot(OUTPUT:1)	close( J1 )					SOURCE(INPUT:1, Nominal)	LOAD(OUTPUT:1, Light)	VOUT=1.505V|Bode Plot|Vin Nominal|Light Load
Ac	BodePlot(OUTPUT:1)	close( J1 )	PromoteGraph( BODE PLOT, 100 , 1 , Bode Plot Nominal Vout )	PromoteGraph( LOAD , 90 , 1 )	PromoteScalar( gain_margin , Gain Margin @ 1.505V (dB))	PromoteScalar( phase_margin , Phase Margin @ 1.505V (deg))	SOURCE(INPUT:1, Nominal)	LOAD(OUTPUT:1, 50%)	VOUT=1.505V|Bode Plot|Vin Nominal|50% Load
Ac	BodePlot(OUTPUT:1)	close( J1 )					SOURCE(INPUT:1, Nominal)	LOAD(OUTPUT:1, 100%)	VOUT=1.505V|Bode Plot|Vin Nominal|100% Load
***
***	these tests use the new modified values								
***
Ac	BodePlot(OUTPUT:1)	open( J1 )					SOURCE(INPUT:1, Maximum)	LOAD(OUTPUT:1, Light)	VOUT=0.6V|Bode Plot|Vin Maximum|Light Load
Ac	BodePlot(OUTPUT:1)	open( J1 )	PromoteGraph( DVM BODE PLOT#log#ac , 80 )	PromoteGraph( DVM LOAD#pop )	PromoteScalar( gain_margin , Gain Margin @ 600mV (dB))	PromoteScalar( phase_margin )	SOURCE(INPUT:1, Maximum)	LOAD(OUTPUT:1, 50%)	VOUT=0.6V|Bode Plot|Vin Maximum|50% Load
Ac	BodePlot(OUTPUT:1)	open( J1 )					SOURCE(INPUT:1, Maximum)	LOAD(OUTPUT:1, 100%)	VOUT=0.6V|Bode Plot|Vin Maximum|100% Load
***