back to overview ^
» DVM Test Report: Ac Analysis|Input Impedance|Vin Maximum|100% Load
| Test Details | |
| Schematic | LTC3406B - DVM ADVANCED.sxsch |
| Test | Ac Analysis|Input Impedance|Vin Maximum|100% Load |
| Date / Time | 5/23/2011 15:14:29 PM |
| Report Directory | DVM_REPORTS\2011-05-23-15_12_01_PM\Ac Analysis\Input Impedance\Vin Maximum\100% Load |
| Log File | report.txt |
| Status | PASS |
| Simulator | simplis |
| Deck | input.deck |
| Init | input.deck.init |
| Measured Scalar Values | |
| min_src1_gain | 6.73481 |
| max_src1_gain | 26.1579 |
| min_src1_gain_freq | 446.684k |
| max_src1_gain_freq | 794.328k |
| sw_freq | 955.632k |
| FREQUENCY | AVG 100.278m MIN 0 MAX 5 RMS 708.09m |
| ILOAD1 | AVG 1.50063 MIN 1.49625 MAX 1.50451 RMS 1.50063 |
| ISRC1 | AVG 619.348m MIN 466.026u MAX 1.81961 RMS 973.426m |
| VLOAD1 | AVG 1.50562 MIN 1.50123 MAX 1.50951 RMS 1.50562 |
| VSRC1 | AVG 5.49938 MIN 5.49818 MAX 5.5 RMS 5.49938 |
| Measured Spec Values | |
| min_vout1 | PASS: Min. Output1 Voltage (1.50123) is greater than or equal to Min. Output1 Voltage Spec (1.42975) |
| max_vout1 | PASS: Max. Output1 Voltage (1.50951) is less than or equal to Max. Output1 Voltage Spec (1.58025) |
 ZSRC1 Plot
ZSRC1 PHASE
ZSRC1 MAG
|
|
| SXGPH File | simplis_ac64_3571.sxgph |
 SRC1
VSRC1
ISRC1
|
|
| SXGPH File | simplis_pop50_3552.sxgph |
 LOAD1
VLOAD1
ILOAD1
|
|
| SXGPH File | simplis_pop50_3557.sxgph |
 default
FREQUENCY
|
|
| SXGPH File | simplis_pop50_3535.sxgph |
| Other SXGPH Files | |
| clock#pop | simplis_pop50_3540.sxgph |